If you've just moved into a new home, chances are good that you're dealing with at least a few internet dead spots. Whether it's in the far corners of your home or in certain rooms where the signal just doesn't seem to reach, these dead spots can be frustrating. But there's no need to put up with them—there are plenty of ways to eliminate dead spots and get better home internet coverage throughout your home. 

In this article, you will understand what internet dead spots are and how to get rid of them in your new home. Let’s begin!

What is an Internet Dead Spot?

Internet dead spots are areas in your home that cannot pick up WiFi signals. It means that whenever you’re in that room or spot, your device won’t be able to connect to the internet. Dead spots or dead zones usually happen on large homes that most typical routers cannot cover, regardless if you have DSL, cable, or fiber internet.

What Causes Internet Dead Spots?

Because most office residences were constructed before WiFi was invented, they aren't usually well-suited to facilitating connectivity of any kind. WiFi waves don't work well in environments with thick plaster walls and metal wirings.  

Furthermore, the materials of our homes and workplaces might also reduce signal strength. Wireless signals can be blocked by large metal appliances like refrigerators and stoves as well as signal-producing home goods like microwaves and baby monitors.

Your connection may also be affected by the presence of other networks in the same area. The closer a room is to the wireless router, the more difficult it will be to receive a signal. If you're in a distant location like a basement, balcony, or garage, you might not be able to get online at all.

How to Get Rid of Internet Dead Spots in Your Home

There are a number of ways that you can eliminate internet dead spots in your home. By using a combination of these methods, you should be able to get coverage throughout your entire house regardless of your wireless provider.

1. Move your router.

One of the simplest things that you can do to improve your WiFi signal is to move your router. If it's currently in a central location, try moving it closer to the edge of your home. This will give the signal a boost as it tries to reach further areas. 

If you have a multi-story house, placing the router on an upper floor will also give you better coverage. Just make sure that you don't put it in a closet or other enclosed space, as this can actually block the signal.

2. Use a WiFi extender.

If you still can't seem to get rid of your dead spots, you might need to use a WiFi extender. These devices amplify the signal from your router and help to extend the reach of your WiFi network. You can find them at most electronics stores, and they're relatively easy to set up. Just place the extender in a location where it will receive a strong signal from your router, and it should do the rest.

3. Update your firmware.

Dead spots may also be telling signs that your router's firmware is out of date. Firmware is the software that runs on your router, and it can become outdated over time. To check if this is the case, log into your router's control panel and look for a firmware update option. If one is available, be sure to follow the instructions carefully to avoid damaging your router.

4. Change your antenna.

If you have a router that supports external antennas, changing them out could be a good way to improve your signal strength. There are a number of different types of antennas available, so doing some research to find the best one for your needs is a good idea. Once you've got the right antenna, simply screw it into place, and you should start seeing an improvement in your signal.

5. Use a powerline adapter.

Powerline adapters are a great way to improve your WiFi signal if you have trouble with dead spots. These adapters use your home's electrical wiring to create a network, so they're perfect for homes with thick walls or metal interference. Powerline adapters are easy to set up and can be found at most electronics stores.

For those in more rural areas, fixed wireless internet offers a better solution when traditional broadband services like DSL or cable are not available. Fixed wireless internet involves a small antenna or satellite dish mounted on your property, usually on a roof or similar elevated structure. This antenna receives a direct line-of-sight wireless signal from a nearby tower or base station. Your home internet service provider can tell you exactly what speeds are available, but you can usually get to around 400Mbps with the radio signal.

6. How To Get Rid of Internet Dead Spots in Your Home?

Unlike satellite internet, which often suffers from high latency due to the signal traveling to and from an orbiting satellite, fixed wireless has a much shorter transmission distance. This allows it to provide lower latency and more stable connection speeds, often comparable to wired broadband offerings. Installation is straightforward and typically quicker than laying new cable lines, making it an attractive option for rural homes needing reliable and relatively fast internet service.

Conclusion

Dealing with dead spots in your new home can be frustrating, especially if you are heavily reliant on the internet. If you’re having problems with dead spots in your home, give these tips a try and see if it improves the WiFi coverage in your new home.